Roadmaster Polyurethane Bushing Kit for 1-5/8" Diameter, Factory Front Anti-Sway Bar

Video Transcript for Review of Roadmaster Anti-Sway Bars - Replacement Bushing Kit - RM29ZR

Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at the Roadmaster polyurethane bushing kit for the 1 5/8 inch diameter front anti-sway bar and the 1 3/4 inch diameter rear anti-sway bars on the Chevrolet and GMC P30, P32, and P3500 chassis vehicles. Now, this part here, this was, part will replace the polyurethane bushings and brackets that are needed for your Roadmaster 1 5/8 inch diameter front anti-sway bar, which is part number RM-1109-116, which we sell separately on our website. And these also supply the bushings for the factory 1 3/4 inch diameter rear anti-sway bars on the 1968 to 2000 Chevrolet GMC P30, P32, and P3500 chassis vehicles. Now, this part includes all the installation hardware.

It does not include the anti-sway bars. It will include the four 1 5/8 inch diameter polyurethane bushings. It will include the four 1 3/4 inch diameter polyurethane bushings. Eight of the bushing new brackets that the bushings install into. All the mounting hardware you need.

Even comes with a nice set of detailed instructions. And they even give you two tubs of bushing lubricant to apply to the bushings when you go to install them. Now, the polyurethane bushings work better than your standard rubber bushings for a lot longer-lasting system, and because the polyurethane is more durable and resistant to damage that can be caused by oil, gas and ozone. These parts are all made in the USA. But that should do it for the review on the Roadmaster polyurethane bushing kit for the 1 5/8 inch diameter front anti-sway bars and the 1 3/4 inch diameter rear anti-sway bars on the Chevrolet and GMC P30, P32 and P3500 chassis vehicles..